Home · All Namespaces · All Classes · Grouped Classes · Modules · Functions |
These classes provide interfaces to telephony.
QAdviceOfCharge | Advice of charge information about a user's phone account |
---|---|
QBandSelection | Interface to select a GSM band for the phone to operate on |
QBinarySimFile | Interface to access binary files on a SIM |
QCBSMessage | Specifies the contents of a cell broadcast message |
QCacheOperationReader | Reads WAP Cache Operation (CO) documents |
QCallBarring | Access to the call barring settings on a GSM phone |
QCallForwarding | Access to the call forwarding settings on a GSM phone |
QCallList | Interface for recording the details of dialed, received, and missed calls |
QCallListItem | Specifies information about a single dialed, received or missed call in a QCallList set |
QCallSettings | Access to auxiliary settings in a GSM phone related to calls |
QCallVolume | Access to GSM call volume control |
QCellBroadcast | Access to cell broadcast messages on GSM networks according to 3GPP TS 03.41 |
QCommDeviceSession | Facilities to initiate a device session |
QCommInterface | Facilities for implementing client and server communications objects |
QCommServiceManager | Method to discover the active communications services and interfaces |
QDialOptions | Encapsulation of options for dialing an outgoing call |
QGprsNetworkRegistration | Information about GPRS network registration |
QGprsNetworkRegistrationServer | Server-side support for updating the GPRS network registration state |
QMessageWaiting | Information about waiting messages, usually voice mail messages |
QMessageWaitingStatus | Status information about waiting messages for a particular call class and/or telephone number |
QNetworkRegistration | Information about network operators |
QNetworkRegistrationServer | Server-side support for updating the network registration state |
QOtaCharacteristic | Encapsulates characteristics from an Over-The-Air (OTA) network configuration message |
QOtaCharacteristicList | Encapsulates a list of characteristics from an OTA network configuration message |
QOtaReader | Support for parsing Over-The-Air (OTA) network configuration messages |
QPhoneBook | Interface to the SIM phone books of a device |
QPhoneBookEntry | Specifies the contents of a single entry in a device's phone book |
QPhoneBookLimits | Specifies the limits of a phone book's storage capacity |
QPhoneCall | Interface for managing individual incoming and outgoing phone calls |
QPhoneCallImpl | Base class for specific phone call implementations |
QPhoneCallManager | Access to the phone's call list |
QPhoneCallProvider | Implements a mechanism for phone call providers to hook into the telephony system |
QPhoneRfFunctionality | Method to get or set the level of RF activity on a phone |
QPhoneStatus | Basic status information about the phone |
QPinManager | Method for the system to query the user interface for pin values |
QPinOptions | Information about a pin that may be useful in determining the type of user interface to use |
QPreferredNetworkOperators | Information about preferred network operators |
QRecordBasedSimFile | Interface to access record-based files on a SIM |
QSMSMessage | Specifies the contents of an SMS message |
QSMSMessagePart | Specifies a part within an SMS message |
QSMSReader | Access to the incoming SMS message store on the modem device |
QSMSSender | Facilities to send SMS messages |
QServiceChecker | Allows client applications to check to see if a service is valid to use |
QServiceCheckerServer | Allows telephony services to easily advertise their hardware failure state |
QServiceIndicationReader | Reads Service Indication (SI) documents |
QServiceLoadingReader | Reads Service Loading (SL) documents |
QServiceNumbers | Access to GSM service numbers such as voice mail and SMS service center |
QSimCommand | Specifies the details of a SIM toolkit command message |
QSimControlEvent | Specifies the contents of a |
QSimEnvelope | Specifies the contents of a SIM ENVELOPE message |
QSimFiles | Interface for reading and writing the files on a SIM |
QSimGenericAccess | Interface to send commands directly to a SIM |
QSimIconReader | Access to icons on a SIM |
QSimInfo | Information about a SIM's identity |
QSimMenuItem | Information about a menu item within a SIM toolkit application |
QSimTerminalResponse | Specifies the contents of a SIM toolkit TERMINAL RESPONSE message |
QSimToolkit | Interface to SIM toolkit applications |
QSupplementaryServices | Access to structured and unstructured supplementary services within GSM networks |
QTelephony | Contains telephony-related enumerated type definitions |
QTelephonyConfiguration | Access to configuration parameters on specific telephony services |
QTelephonyService | Convenient wrapper to create telephony services and the interfaces that they support |
QTelephonyTones | Access to a tone generator for DTMF tones and other special telephony sounds |
QWbXmlReader | Reads the contents of a Wireless Binary XML (WBXML) stream |
QWbXmlToXmlContentHandler | Assists with converting WBXML documents into ordinary XML |
QWmlReader | Reads Wireless Markup Language (WML) documents |
QWspDateTime | Functions for converting between the WSP date time formats and standard date time formats |
QWspField | Encapsulation of a field name and value |
QWspMultipart | Represents a collection of parts from a WSP message |
QWspPart | Represents a single part within a WSP message |
QWspPduDecoder | Facilities for parsing WSP PDU's |
QWspPduEncoder | Facilities for writing WSP PDU's |
QWspPush | Represents the contents of a WSP Push PDU |
Copyright © 2009 Trolltech | Trademarks | Qt Extended 4.4.3 |